Tiger Beer

Readers of this blog who already know a bit about brewing might occasionally think of me “he hasn’t a clue what he’s doing”, and indeed, some of the time you’d be right. However, to get a proper feel of the everyday low-level incompetence, you’d need a look at every aspect of brewing, including simply ordering malts. After spending 5 hours sitting beneath the letterbox, waiting for my delivery of malts, it only occurred to me after I’d opened the parcel that 25^oL isn’t the same as 25EBC*. So instead of 3kg of light crystal malt, which I’d probably use quite a lot of, I’ve got 3kg of CaraPils, which features in, as far as I can see, two recipes. D’oh! Never mind, I’ve got till Christmas before it goes off**!

So, today, I’m brewing 1 gallon of Tiger Beer to a Dave Line recipe. I’m only brewing a gallon because a) the battery on my drill stopped working, and I can’t finish my Zapap Lauter Tun, and b) because the recipe calls for lots of saccharin tablets, which I don’t want to use, and I don’t think are necessary, so if it turns out they are necessary, I’ve only made 1 gallon of a very dry lager.

So, as promised, here’s this post’s photo: My fantastically top of the range (make that on top of the range) Mash Tun. The WD40 on the right was for essential gas-hob maintenance, and hopefully won’t end up in the beer, but you never know.

The recipe features Pilsner Malt (although it asks for Lager malts), Flaked Rice, Hallertauer hops I’ll be fermenting it with Brewferm Lager Yeast, which this morning seems to be floating on top like an Ale yeast…

I’m not one for doling out advice, but here’s one: It’s quite important to double check your sums before you start brewing. This morning I was only bringing up half of the required strike water (the water in which you mash your malted grains) to temperature. After thinking something along the lines of “that doesn’t look like nearly enough water” but not quite thinking “oh well”, did I quickly add in some more. Oh well, disaster averted, what next?

* One of the three colour-codes used to describe the darkness of the malts, and how it will affect beer.
**A very malty Christmas ale?